What can I use to open the pores of wood for the refinishing?

Restore you your furniture look like new.

Feature this photo

Refinishing is the surface of furniture and floor coverings like new look. To wooded land car repair, old surfaces which seal the wood must be removed first. This procedure opens the pores of the wood so that it can accept the stain. A number of methods are used to open the pores of the wood for the coating to prepare.

Related queries: wood pores and refinishing

Wood can have different types of pores. It has no specific pattern of pores on the surface of the wood, such as pine, poplar, or Maple. These types of wood are called closed grain and require no fill the pores, to achieve a smooth surface. Other types of wood are more open, distinctive pores in the grain, according to the website Minwax. They need to fill a smooth surface on the surface. Opening of the grain of the wood is done, to stain the wood soak deeper a richer or darker color create can be.

Sand paper

Sandpaper is a way to open the grain of the wood. The sandpaper removes the surface quality, as well as particles of debris to fill the pores. If this layer of skin is removed, the pores in a State for the stain soaking will be easier in the wood fibers. Grind the bumps and spots helps the wood stain more evenly to absorb depending on the processing expert Bruce Johnson on his website AskBruceJohnson. This technique helps to achieve the right color in the wood. Grain numbers less than 100 are coarse and are good for large parts of the surface to remove, while the are between 100 and 200 medium grain size and are used to remove scratches and pores to open. Grits over 400 are very fine and be used for final polishing the surface of wood.

Water

If water gets into the pores of the wood, the surrounding material is to thresholds, opening the pores for better absorption of stains. MISTED with a fine spray of water is a good technique use to open the pores when stained hardwood flooring. Let the wood dry and then apply the stain. This technique is called "Water dive."

Wire brush

Wire brush is often used to open the pores of the wood in preparation for staining. Paintbrush along the lines of the grain along the entire surface of the wood. You lightly scuff the surface to smooth rough areas, according to furniture website Wisno paint job. The patch is then applied for a smooth, even color.

Related SearchesReferencesMinwax: wood plain TermsAsk Bruce JohnsonWison wood furniture coating: wire BrushPhoto credit Jupiterimages/Photos.com/Getty ImagesRead continue:

Print this ArticleCommentsFollow eHowFollow